PEGA Clutch® · Engineered by GTE

Ferrari 360 OTO.
A dedicated twin-disc conversion.

An F430-type twin-disc clutch. A GTE-engineered conversion system. PEGA friction linings selected for your application.

Created for Ferrari 360 Modena and Challenge Stradale projects, the OTO programme brings the clutch, flywheel and ring-gear arrangement together as one matched conversion package.

222090-360OTO · Limited series of 360 serialized builds

Ferrari 360 OTO twin-disc clutch conversion with PEGA and GTE branding.

More than a replacement clutch.

A conventional rebuild retains the original 360 clutch configuration. OTO changes that arrangement using an F430-type twin-disc clutch and dedicated GTE conversion components. It is a GTE development programme, rather than a factory Ferrari option.

A matched system

The clutch, intermediate plate, flywheel, ring gear and release geometry must work together. A standalone F430 clutch is not a direct replacement for the standard 360 installation.

PEGA friction materials

Choose from the lining configurations offered on the current product listing. Transmission type and intended use guide the specification.

Individually serialized

The programme is specified as a limited production run of 360 units. Confirm current availability, build scheduling and assigned identification with GTE.

What the standard package contains.

  • A rebuilt Ferrari F430 twin-disc clutch assembly, reference 222090.
  • The intermediate plate and selected PEGA friction linings.
  • The specified GTE conversion flywheel and ring-gear arrangement.

A new clutch assembly is a separate upgrade, subject to supply. The current listing and approved estimate define the exact supplied components and services.

Conversion reference: 222090-360OTO.
This identifies the GTE conversion. Ferrari reference 222090 identifies the F430 clutch assembly used in the standard build.

Ferrari 360 OTO assembly edge detail showing the clutch cover, flywheel ring gear and inspection markings.

Five PEGA stages. One application-specific build.

Stage 1

Organic

FX4C-SC for street use.

Stage 2

Organic + Ceramic

Organic and ceramic combination for manual applications.

Stage 3

Kevlar

FXSS Kevlar. The current OTO option is listed with the Stradale TCU.

Stage 4

Kevlar + Ceramic

For manual performance applications.

Stage 5

Ceramic

BFXX for Challenge or Trofeo racing applications only.

Select the configuration offered on the current GTE listing. Friction stage alone does not establish a universal torque or horsepower rating; the complete assembly and control setup determine behaviour.

Plan the installation as part of the conversion.

Professional installation and applicable calibration are required. The installer must review the fitted transmission, clutch-release arrangement, clearances and supporting hardware against the supplied conversion instructions.

  • Document the vehicle’s existing clutch and transmission configuration.
  • Agree the lining stage, rebuilt or new-clutch option, component scope and availability before ordering.
  • Specify balancing and any additional assembly work separately in the approved scope.
  • Complete the required commissioning and keep the conversion identification with the vehicle’s service history.

Future service must follow the converted clutch and flywheel arrangement, rather than the original VIN-based clutch listing alone. Vehicle installation, release-system parts and other operations are included only when expressly specified.

Before you order.

Is OTO an F1-to-gated-manual conversion?

No. The clutch conversion and a gated-manual gearshift conversion are separate projects. Identify any existing or planned transmission conversion before choosing the clutch specification.

Can I fit a standard F430 clutch directly?

No. The OTO system requires its matched GTE conversion components and the correct release-system geometry, installation checks and setup.

Does twin-disc automatically mean a specific performance increase?

Clutch behaviour depends on the friction materials, clamping load, dimensions and control setup of the complete assembly. Discuss the specification and available evidence for the exact build with GTE.

How do I arrange an OTO build?

Use the existing GTE product listing to review the current options, then confirm supply, scheduling and the agreed project scope. The customer or installer is responsible for verifying the installed parts and compatibility; GTE does not provide VIN-to-part checks or fitment confirmations.

Your 360. A purpose-built clutch configuration.

Review the current package and select the PEGA specification for your project.

GTE OTO technical guide · The OTO story · Ferrari clutch range

Compare PEGA friction materials and driving mix.

This is the full PEGA Clutch® material range. Available stages vary by clutch assembly; choose only an option offered on the linked product listing. The percentages describe recommended driving mix.

PEGA Clutch stages 1–5: Organic 80% street and 20% sport; Organic/Ceramic 60% street and 40% sport; Kevlar 40% street and 60% performance; Kevlar/Ceramic 20% street and 80% high performance; Ceramic Extreme 100% racing.
Open the full-size chart ↗ · Stage 5 is for racing use. Confirm the material, installed assembly and rebuild scope before ordering.